MW-406A Midwest AT-6 fiberglass wheel well fairing
MW-406A Midwest AT-6 fiberglass wheel well fairing - Image 2

MW-406A Midwest AT-6 fiberglass wheel well fairing

$39.99

If you do not see the product on our website, please call direct 866-457-3777 extension 1, it rings direct to my cell.
Now lets talk a bit about fiberglass products, just as with other suppliers of fiberglass RC products, there will be blemishes. You will see pin holes when you go to finish it for paint.
We recommend the following if you plan on doing the Primer and prep work yourself.
Get a good high build primer such as Restoration Shop

  • Spray a medium coat and sand down with 600 ~ 800 grit
  • Repeat this until you sand out any fisheye(s) and pinhole(s)
  • Wet sand to minimum 3000 grit
  • tack cloth down and spray a base coat such as Stitts Aerothane
Made to Order

  • Total

SKU: MW-406A Category: Tags: , , , Brand:

Description

This is a reproduction wheel well fairing for the North American AT-6 Texan Trainer made by MidWest kits. we use a combination of 2~6 ounce e-weave fiberglass and west systems epoxy and 3m filllers to produce a high quality scale product. Please note that as in any non-bagged fiberglass process, minor imperfections such as fiberglass overlaping areas and brush marks may show through from the inside as can be seen in the picture.

A little about the model for reference only:

The Midwest AT-6 Texan is a scale model aircraft kit of the North American T-6 Texan, a trainer aircraft used by the United States Army Air Forces and other air forces during World War II. The model features electric main retracts and functional 4130 chrome moly steel struts for realistic landing gear operation. It’s designed for .40 to .60 CID glow engines and has a wingspan of 82 inches.

Additional information

Weight 0.9 lbs
Dimensions 8 × 8 × 8 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products