Awaiting product image

L-714 Lanier Cap 232 fiberglass cowl

$49.99

If you do not see the product on our website, please call direct 866-457-3777 extension 1, it rings direct to my cell.
Now lets talk a bit about fiberglass products, just as with other suppliers of fiberglass RC products, there will be blemishes. You will see pin holes when you go to finish it for paint.
We recommend the following if you plan on doing the Primer and prep work yourself.
Get a good high build primer such as Restoration Shop

  • Spray a medium coat and sand down with 600 ~ 800 grit
  • Repeat this until you sand out any fisheye(s) and pinhole(s)
  • Wet sand to minimum 3000 grit
  • tack cloth down and spray a base coat such as Stitts Aerothane
Made to Order

  • Total

SKU: L-714 Category: Tags: , , , Brand:

Description

This is a reproduction cowl for the Cap 232 made by Lanier kits. we use a combination of 2~6 ounce e-weave fiberglass and west systems epoxy and 3m filllers to produce a high quality scale product. Please note that as in any non-bagged fiberglass process, minor imperfections such as fiberglass overlaping areas and brush marks may show through from the inside as can be seen in the picture.

A little about the model for reference only:

The Lanier Cap 232 is a giant scale model airplane that’s popular among RC enthusiasts. It’s known for its 80-inch wingspan and can be built from an ARF (Almost Ready to Fly) kit or from scratch. The plane is quite hefty, weighing around 18 lbs when fully assembled, and typically requires a powerful engine like the Quadra 35 or similar to achieve good performance.

Additional information

Weight 3 lbs
Dimensions 16 × 12 × 10 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products