MW-402 Midwest Super Stinker fiberglass wheel pants
MW-402 Midwest Super Stinker fiberglass wheel pants - Image 2

MW-402 Midwest Super Stinker fiberglass wheel pants

$49.99

If you do not see the product on our website, please call direct 866-457-3777 extension 1, it rings direct to my cell.
Now lets talk a bit about fiberglass products, just as with other suppliers of fiberglass RC products, there will be blemishes. You will see pin holes when you go to finish it for paint.
We recommend the following if you plan on doing the Primer and prep work yourself.
Get a good high build primer such as Restoration Shop

  • Spray a medium coat and sand down with 600 ~ 800 grit
  • Repeat this until you sand out any fisheye(s) and pinhole(s)
  • Wet sand to minimum 3000 grit
  • tack cloth down and spray a base coat such as Stitts Aerothane
Made to Order

  • Total

SKU: MW-402 Category: Tags: , , , Brand:

Description

This is a reproduction pair of wheelpants for the Super Stinker made by MidWest kits. we use a combination of 2~6 ounce e-weave fiberglass and west systems epoxy and 3m filllers to produce a high quality scale product. Please note that as in any non-bagged fiberglass process, minor imperfections such as fiberglass overlaping areas and brush marks may show through from the inside as can be seen in the picture.

A little about the model for reference only:

The Midwest Super Stinker is a scale model biplane kit designed for aerobatic flying. It’s a Pitts Special variant, known for its outstanding maneuverability and performance. The kit includes high-quality wood parts, such as balsa wood, plywood, and light-ply wood, and is designed for .40 to .60 CID glow engines. It features ailerons, elevator, rudder, and throttle controls for precise maneuvering.

Additional information

Weight 1.5 lbs
Dimensions 12 × 12 × 12 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products