P-900 Pica Aeronca 1/5 scale fiberglass cowl
P-900 Pica Aeronca 1/5 scale fiberglass cowl - Image 2

P-900 Pica Aeronca 1/5 scale fiberglass cowl

$59.99

If you do not see the product on our website, please call direct 866-457-3777 extension 1, it rings direct to my cell.
Now lets talk a bit about fiberglass products, just as with other suppliers of fiberglass RC products, there will be blemishes. You will see pin holes when you go to finish it for paint.
We recommend the following if you plan on doing the Primer and prep work yourself.
Get a good high build primer such as Restoration Shop

  • Spray a medium coat and sand down with 600 ~ 800 grit
  • Repeat this until you sand out any fisheye(s) and pinhole(s)
  • Wet sand to minimum 3000 grit
  • tack cloth down and spray a base coat such as Stitts Aerothane
Made to Order

  • Total

SKU: P-900 Category: Tags: , , Brand:

Description

This is a reproduction cowl for the aeronca chief made by Pica. we use a combination of 2~6 ounce e-weave fiberglass and west systems epoxy and 3m filllers to produce a high quality scale product. Please note that as in any non-bagged fiberglass process, minor imperfections such as fiberglass overlaping areas and brush marks may show through from the inside as can be seen in the picture.

A little about the model for reference only:

The Pica Aeronca Chief is a scale model aircraft kit designed to replicate the Aeronca Chief, a classic light aircraft from the postwar era. The kit includes laser-cut parts, printed plans, vacuum-formed plastic cowl, and wheel pants. It’s designed for 4-channel control (rudder, elevator, aileron, throttle) and is powered by a Himaxx 2812-850 brushless motor. The model has a wingspan of 54 inches and a weight of 15 ounces.

Additional information

Weight 1.3 lbs
Dimensions 12 × 12 × 8 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products