P-914Y Pica Waco 1/6 scale YMF fibergalss cowl
P-914Y Pica Waco 1/6 scale YMF fibergalss cowl - Image 2

P-914Y Pica Waco 1/6 scale YMF fibergalss cowl

$64.99

If you do not see the product on our website, please call direct 866-457-3777 extension 1, it rings direct to my cell.
Now lets talk a bit about fiberglass products, just as with other suppliers of fiberglass RC products, there will be blemishes. You will see pin holes when you go to finish it for paint.
We recommend the following if you plan on doing the Primer and prep work yourself.
Get a good high build primer such as Restoration Shop

  • Spray a medium coat and sand down with 600 ~ 800 grit
  • Repeat this until you sand out any fisheye(s) and pinhole(s)
  • Wet sand to minimum 3000 grit
  • tack cloth down and spray a base coat such as Stitts Aerothane
Made to Order

  • Total

SKU: P-914Y Category: Tags: , , Brand:

Description

This is a reproduction cowl for the Waco YMF made by Pica. we use a combination of 2~6 ounce e-weave fiberglass and west systems epoxy and 3m filllers to produce a high quality scale product. Please note that as in any non-bagged fiberglass process, minor imperfections such as fiberglass overlaping areas and brush marks may show through from the inside as can be seen in the picture.

A little about the model for reference only:

The Pica 1/6 Scale Waco YMF-3 is a scale model aircraft kit of the Waco YMF-3, a classic biplane used for aerobatic flying. The kit includes balsa wood, plywood, and vacuum-formed plastic parts, and is designed for .45 to .60 engines or equivalent electric motors. It features ailerons, elevator, rudder, and throttle controls for precise maneuvering. The model has a wingspan of 60 inches and a weight of around 7 lbs.

Additional information

Weight 3 lbs
Dimensions 15 × 15 × 15 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products